Start with your TEO

As you get your new TEO out of the box, quickly press the power button 5 times in 2 seconds to lock or unlock TEO.

“Lock status” means the device is power off. “unlock status” means the device is power on. Avoid accidentally touching the button and causing it to heat up.

Gently insert NEAFS stick Straight into the round slot (barrel) until it can’t go any further, do NOT twist the stick into the barrel.

Then activate TEO by pressing and holding the power button for 2 seconds. You will feel a small vibration to confirm heating has begun.

Please note again, the sticks are to be pushed straight into the device, and NOT to be “twisted” into the device.

After 20 seconds you will feel another vibration indicating TEO is ready to use. You can start enjoy your NEAFS sticks.

Inhale as you would normally. Each stick lasts a minimum of 15 puffs.

TEO will automatically stop heating after approx 4 minutes and the white light will flash, meaning the heating has stopped. If the light has gone out, and you need to continue heating, leave the Stick in the TEO, and press and hold the power button for 2 seconds. You will feel a small vibration to confirm heating has begun. After the 2nd vibration, you can then continue with the Neaf stick until you think it has come to an end.