If you have arrived here looking for information on how to clean your heated tobacco device, you have probably already discovered the joys of these life-changing devices. We shall spare you the long introduction of what they are or how they work – you already know.
You will also be aware that tobacco-heated products (or HTPs for short) only perform at their best when they are clean. Even our very own NEAFS, which runs on a heated cellulose blend and not tobacco leaves, needs the occasional bit of TLC. And by that, we mean something other than a cursory wipe down the front of your shirt. We mean a proper clean.
Keep’em Clean
Through this short blog post, we shall show you two things. First, we will offer a basic rundown on how to clean a standard, generic, heated tobacco product. After that, we shall address how to clean NEAFS, our alternative HTPs.
Before doing so, you need to gather a cotton bud or a special ‘cleaning stick’ (which is basically a posh cotton bud), some rubbing alcohol, and a clean cloth. A flat surface of some description would be useful, also.
Ready to get sprucing? Let’s get to it.
How to Clean Your Heated Tobacco Device: Step-by-Step
- Turn off the Device: Always ensure your device is turned off and completely cool before you begin the cleaning process. This is for your safety and to protect the device’s components.
- Disassemble the Device: Carefully take apart your heated tobacco device, if possible. Remove the mouthpiece, heating chamber, and any other removable components according to the manufacturer’s instructions.
- Remove Debris: Use a dry cotton bud or a soft-bristled brush to gently remove any loose tobacco residue or debris from the heating chamber and other parts of the device. Again, be gentle to avoid damaging any heating elements.
- Clean with Cotton Buds: Dip a new cotton bud or cleaning stick in isopropyl alcohol. Wring out excess alcohol to avoid any dripping. Carefully clean the inside of the chamber, focusing on any areas with built-up residue. Do not saturate the device!
- Wipe Down the Components: Use a clean, alcohol-dampened cloth to wipe the exterior parts of the device and any non-electrical components. For electrical connections, use a dry cloth or a cotton bud to remove dust and buildup.
- Air Dry: Allow all parts to air dry completely on a clean, flat surface. Ensure all alcohol has evaporated before reassembling the device to avoid any risk of ignition.
- Reassemble the Device: Once all the components are dry, reassemble your device according to the manufacturer’s instructions. Make sure all parts are secure and correctly aligned.
- Perform a Check: Turn on the device to ensure it heats properly and functions smoothly. If you notice any irregular performance, double-check if all parts are clean and correctly assembled.
How to Clean NEAFS: Heated Tobacco Alternative
Similar steps apply to NEAFS, although the process is a little easier. We designed our NEAFS TEO devices to be as hassle-free as possible, including cleaning.
Simply remove the top (or head) of the device, and slide the stick holder upwards to reveal the special heating blade, then carefully clean with alcohol.
That’s all there is to it. Did we mention that NEAFS is hassle-free?
Wrap Up
Even the crème de la crème of products, such as NEAFS, are going to run a little poorly if they are never taken care of. After all, even a Porsche needs the occasional service in order to perform well.
Either way, the process isn’t complicated. Just break your product down and gingerly clean the exposed bits with a little alcohol. Pretty simple stuff, really.
FAQs
How does heated tobacco work?
Heated tobacco devices warm tobacco to a specific temperature below the combustion point, releasing nicotine and flavour without burning the tobacco. This process produces an aerosol, which is then inhaled, providing a similar experience to smoking but with reduced harmful chemicals.
How does NEAFS work?
NEAFS is very similar to heated tobacco products, although we use a specially formulated, tobacco-free blend. We believe that if you are going to use a cigarette alternative, you might as well go the whole nine yards and avoid tobacco entirely. Our unique blend is designed to provide a taste and experience that closely mimics traditional cigarettes without the use of tobacco leaf.
How to charge heated tobacco device?
Most devices have a low battery indicator. NEAFS, for example, shows an orange blinking light to indicate low battery. Just plug it into a power source and recharge.
Do NEAFS Sticks contain nicotine?
Absolutely, and we offer both nicotine and nicotine-free options to suit all preferences. What makes our sticks so wonderfully different is the use of a high-quality cellulose base instead of traditional tobacco, which delivers an amazing taste experience whether you choose nicotine or prefer to go without.
Can you use NEAFS Sticks in other devices?
NEAFS Sticks are generally compatible with various devices. However, for optimal performance, we recommend using them with our specifically designed TEO device. This ensures you get the best possible experience tailored to the unique properties of NEAFS Sticks.
